A special water-based acrylic-alkyd varnish developed for metal surfaces. It provides fast air drying and is applied to protect metal surfaces against corrosion.
It is an environmentally conscious product with very low VOC content. It is a non-flammable and non-combustible varnish system that does not contain harmful solvents or toxic substances.
| Property | Value |
|---|---|
| pH | 8–9 |
| Solids Content (%) | 37 +/- 2 |
| Application Viscosity (DIN CUP #4, 25°C) | 15–20 sec. |
| Color | Clear or transparent colors |
| Density (g/cm³) (23°C) | 1.07 +/- 0.05 |
| Gloss (60°) | Glossy |
| VOC (g/L) | 50 +/- 5 |
| VOC Limit | EU DIRECTIVE 2004/42/CE – 130 g/L |
Thinning: Dilute with water. Hard or well water is not recommended.
Application: Dilute with 5–10% water for brush and roller application, and 15–20% for spray gun application.
Coating: At least two coats are recommended. Allow 4–6 hours between coats. Allow 3–7 days for full curing.
Cleaning: Clean with water before the product dries. Once dried, it can be cleaned with thinner.
Store in the original packaging, tightly closed, in a dry place.
Protect from direct sunlight. The storage temperature should be maintained between 5–25°C.
Protect from freezing.
Under these conditions, the shelf life is 6 months.
